Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 0+KO HL 4
- KO HL 1+KO RL 2
- KO HL 1+KO HL 2
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 0+KO HL 4
- KO HL 1+KO RL 2
- KO HL 1+KO HL 2
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for cases: AKG 165 42/ AKG 165 42 K
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for cases: AKG 165 42/ AKG 165 42 K
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 2+KO HL 2
- KO HL 2+KO RL 2
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 2+KO HL 2
- KO HL 2+KO RL 2
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 0+KO HL 6
- KO HL 1+KO HL 4
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 0+KO HL 6
- KO HL 1+KO HL 4
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 2+KO HL 4
- KO RL 2+KO HL 4
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases:
- KO HL 2+KO HL 4
- KO RL 2+KO HL 4
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases: KO HL 1+KO HL 6
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
for combination cases: KO HL 1+KO HL 6
Case rear panel with integrated mounting rail
- universal, massive case rear panel with integrated mounting rail made of aluminum
- secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
- for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
- quick and simple mounting of the case to a mounting rail by snapping on directly
- replaces a standard cover plate of the respective case
- adapted to the respective case
- the position of the mounting rail is always in the middle of the case
- customer-specific machinings or special designs on request
- a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
|
FRI 7:30 - 15:15