- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
- casing tubes made of aluminium sections which are slotted into each other and screwed together
- the recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nm
- the tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate
with a thickness of 1.8 mm, lateral in the profile until 1.6 mm - designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- while using the corresponding case D-Sub connectors can be mounted without front panel
- supplied as demounted kit incl. 2 mm cover plates and mounting material
- cutouts, special lengths and surface treatments upon request
|
contents of delivery: 1 = 2 x case profile; 2 = 2 x cover panel (2 mm); 3 = mounting material
- aluminium case made of half-shells which are slotted into each other for insertion of 100 mm eurocards
- designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- optimized thermal management by means of integrated cooling fin geometry
- further dimensions, machinings and surfaces upon request
|
contents of delivery: 1 = 2 x case profile; 2 = 2 x cover panel (2 mm); 3 = mounting material
- aluminium case made of half-shells which are slotted into each other for insertion of 100 mm eurocards
- designs with fixing straps in the case profiles or cover plates for wall or ceiling mounting
- optimized thermal management by means of integrated cooling fin geometry
- further dimensions, machinings and surfaces upon request
|
FRI 7:30 - 15:15